SKIDRIL  World of Solutions ©
Home Sitemap Contact Us

Mail Address:
PO Box 8041, Greensboro, NC 27419

Service Center:
235 Labrador Dr. Randleman, NC 27317

Tel: 800-843-3745 Fax: 336-674-6690

Gas Powered Post Driver

 

Hydraulic Post Driver (s) and Air Powered Post Driver (s) - Lightweight hard hitting for installing full length posts. All models incorporate a built-in operating valve.

Prices starting at only $1150.00 see below for more info!

The most efficient Hydraulic Post Driver (s) and Air Post Driver (s) in the world, hydraulic versions run off of skid loaders, mini-excavators, tractors and our smallest power pack (7hp Model P38).

   

Hydraulic Post Driver Features

  • Skidril drivers require only a 7hp power pack for 100% impact power
  • Low noise as there is no exhaust from the tool
  • Models available which are equal to 50-85 pound conventional drivers
  • Internal recoil dampening enables hands-free driving
  • Male and female anvil options prevent damage to round post or stakes
  • Over 20 different heads to fit most post types
  • Models which drives round, u-Channel, square post and stakes or pins
  • Requires no extra lubrication or lubricator  

    Air Drivers run off of compressors as small as 17 Cfm.

    Air Post Driver Features

  • Low cost light weight
  • Equivalent to 60 pound conventional air units
  • Several anvil options prevent damage to round post or stakes
  • Over 20 different heads to fit most post types
  • Drives round (up to 2"), T-post and stakes or pins
  • Does not require a separate oil lubricator
  • High efficiency requiring only a 10hp air compressor

Return and Refund Policy

We may accept returns on new and unused product, if in original undamaged packaging. All returns require an RMA # (contact us to obtain this) this must be indicated on the box. A 20% restocking fee applies to all returns of hydraulic machines, which does not include return freight. All returns must be received within 15 days following issuance of an RMA. Return freight is the responsibility of the purchaser.

Looking for a Gas Powered Post Driver ?

<----Click here to see the G20

Model

*Price

       Common Applications

Hp12

$1500  -> T-Post, stakes, silt fence and pins up to 1.875"

Hp16

$2195  -> T-Post, stakes, pins, rounds up to 2"

Hp16G

$1850

 -> Ground Rods 1/2"-1", stakes and pins and T-post

Hp18

$2300  -> T-Post, stakes, pins, rounds to 3", u-channel, sq. tubes

Hp20

$2340  -> T-Post, stakes, pins, rounds to 4.25", u-channel, sq. tubes

AP18

$1150  -> T-Post, stakes, pins, rounds up to 3.5"
*Note: Prices are for the driver only they do not include hose, flow control, drive cap or shipping, call Skidril for a formal quote.
Model Weight (Nominal) Dimensions Flow/Pressure  Blows per minute Impact force
Hp12

22 Lbs (main)

18x6"

5.5-7 Gpm 1600 Psi

1200-2000

29 Ft-Lbs

Hp16

37 Lbs (main)

18x10"

5.5-7 Gpm 1600 Psi

1200-1350

40 Ft-Lbs

Hp16G 35 Lbs (main) 15x10" 5.5-7 Gpm 1600 Psi 1200-1350 40 Ft-Lbs
Hp18 46 Lbs (main) 20x10" 5.5-7 Gpm 1600 Psi 1200-1500 55 Ft-Lbs
Hp20 68 Lbs (main) 24x10" 5.5-8 Gpm 1600 Psi 1200-1500 92 Ft-Lbs
AP18

40 Lbs (main)

22x10"

17-65 Cfm 100-145 Psi

1000-1400

50 Ft-Lbs

2014 Skidril, LLC
All rights reserved.